Low Loader Trailers

AAA 2023 QUAD AXLE LOW LOADER WIDENER 2.5-3.5M

Specifications	Details
Make	AAA Trailers
Model	Quad axle low loader deck widener with bi-fold ramps
Colour	Red, blue or custom options available
Length	Overall length 51 ft (15518mm) - including the ramps Lower deck 10914mm
Width	Exterior: 2500mm – 3500mm
Deck Height	19.5 inch: 995mm 17.5 inch : 895mm
Capacity (ATM)	60 tonnes
Capacity (GTM)	25-37 tonnes
Tare Weight	14.9 tonnes
Brakes	Drum
Coupling	50mm or 90mm 2 position bolt in K-Hitch king pin
Suspension	K-Hitch airbag suspension KT 250 U 11 tonnes rated K-Hitch axles
Warranty	12 months
Tyre Size	265/70R19.5, 235/75R17.5
Rim Type	Steel or aluminium (option)
Pay load -+	32 tonnes without load share dolly, 47 with load share dolly dependent on your state regulations
Spec/Accessories	LED lights Two heavy-duty toolboxes Diesel 10.5 hp engine and hydraulic pump Spare wheel holders mounted to gooseneck that hold 4x spare tires Bi-fold ramps Sea container pins for 20’
Optional Extras	3-way air dump valve Fire extinguisher Reverse alarm 30 litre polished alloy water tank Spare wheels LED beacon light Oversize/road train signs Custom painting

Specifications	Details
Length Usable Deck length	11,200 mm
Width Closed	2500mm
Fully Widened	3500mm
Height Deck Height	900mm on 17.5-inch rims
Capacity	(ATM) 60 tonnes (GTM) 25 tonnes (upgrades available in Western Australia)
Tare Weight	15.4 tonnes complete with ramps and spare wheel
Upper Side	Bi-fold ramps. 900mm wide and fully extended 4700mm Side coaming 8mm thick cold-rolled sheet steel. Tensile strength = 650mPa Flooring 8mm cold-rolled flat sheet steel – high tensile 650mPa. Under-floor construction consists of heavy-duty I-beam cross-members, with industrial C-100 channel under-floor runners for extra support. Skid-plate 16mm thick oscillating skid-plate, with two position bolt-in king pin boss-plates fitted as standard
Hydraulic System	4x 50mm x deck widening cylinders 1x 10hp diesel engine power pack as standard for airbag Electric power pack for spring suspension is standard Unit features Italian-made spool valves as standard
Under Side	Chassis beams I-beam construction: 25mm thick flange plates (350mPa), 10mm webbing plate (450mPa) – half the chassis webbing is double plated for strength and durability ready for those rough roads. Landing gear K-Hitch 2 speed legs King pin K-Hitch 2 position bolt in 50mm or 90mm available
Axles and Suspension	High-quality SAF axles imported from Europe Lift up front axle air-operated Steering axle on the rear Full Wabco EBS control system 3-way air dump valve for ease of loading